Installation Instructions

Prep surface by cleaning well with a lint-free cloth and isopropyl alcohol
Remove backing from the decal:
- Place the decal face-down on a flat surface
- Fold back one corner (or side) of the backing
- Peel the backing up & away from the transfer tape
- Work from one end towards the other
**Make sure that all pieces of the decal stick to the clear transfer sheet**

If any part of the decal sticks to the backing:
- Lay that part of the backing down again
- Press against the backing to make the decal stick to the transfer tape
- Carefully resume peeling towards opposite end
Place the decal in its intended location and apply light pressure to the center with a credit card or your finger.
Check alignment (if you are dissatisfied, carefully lift the decal away from the surface and attempt repositioning - this does not always work)
Finish applying the decal using smooth swipes from the center of the decal towards edges.
Remove transfer tape once the decal is completely adhered. Slowly peel the clear transfer tape away from the decal starting with one corner or side working towards the opposite corner or side

D E C A L N O T E S

We do not recommend wet application for our decals.
Removing your backing slowly and carefully produces best results.
If you choose to reposition the decal, you may damage it.
Since we understand the importance of a perfectly-placed decal, we offer customers a discount of 10% for replacement decals using code "OOPS"
Decals should be allowed 48 hours to fully cure before exposing them to water or excess moisture.
Care and maintenance instructions here